BURBANK, Calif., Nov. 19, 2026 — Hollywood Burbank Airport’s control tower was left with no controller on duty twice on Wednesday evening, Nov. 18, forcing airline pilots to sequence their own arrivals and departures over a shared radio frequency. Normal tower operations were expected to resume Thursday.
What happened
On Wednesday night the Burbank tower declared “ATC Zero,” meaning no air traffic controller was working the airport. Simple Flying reports two such gaps during the evening, each said to have lasted about 30 minutes. Pilots were told to switch to the airport’s common traffic advisory frequency (CTAF), and Southwest and Alaska Airlines crews could be heard on recordings announcing their positions, including a Southwest jet on short final for Runway 8. A Southern California regional controller kept guiding inbound aircraft until the final approach.
No official cause has been given. CBS Los Angeles sources pointed to a staffing problem, and other unconfirmed reports suggested a lone controller’s required rest break. Neither the FAA nor the airport has confirmed a reason, and the airport released no further details. TMZ reported the same problem could come back in the evening hours; the airport’s commercial traffic generally winds down around 10 p.m.
Burbank had a similar episode on Oct. 6, 2025, during a federal government shutdown, when the tower was unstaffed for nearly six hours and average delays topped two hours. This week’s event follows the nationwide FAA ground stop of Friday, Nov. 13.
| Item | Detail |
|---|---|
| Airport | Hollywood Burbank Airport (BUR), Burbank, California |
| When | Wednesday evening, Nov. 18, 2026 (two gaps, about 30 minutes each) |
| Airlines heard on frequency | Southwest, Alaska |
| Cause | Not confirmed; reports point to staffing |
| Return to normal | Expected Thursday, Nov. 19; repeat evening gaps possible, end date TBA |
What it means for non-revs
- Expect evening delays at BUR. If the tower is unstaffed again, flow into Burbank may be slowed by Southern California approach control. Late-evening BUR departures and arrivals are the most exposed.
- Keep LAX, ONT, SNA and LGB in mind. If you are commuting or connecting through the Los Angeles basin, check alternate-airport loads on Southwest and Alaska before you commit to the last BUR flight of the night.
- Don’t plan on the last flight out. A misconnect late in the evening at BUR leaves few rollover options until the next morning; list for an earlier flight where you can.
- Carry on. Short-notice holds and diversions raise the risk of bags being separated from standby passengers.
Sources
- Simple Flying, “Empty ATC Tower At Hollywood Burbank Airport Leaves Pilots To Clear Own Takeoffs & Landings” — https://simpleflying.com/hollywood-burbank-airport-empty-atc-tower-pilots-takeoffs-landings/
- MyNewsLA, “No Active Air Traffic Controller at Burbank Airport Triggers Safety Concerns” — https://mynewsla.com/traffic/2026/11/19/pilots-scramble-to-land-at-burbank-airport-without-air-traffic-controller/
- TMZ, “Hollywood Burbank Airport Left With No Air Traffic Controllers, Reported Staffing issue” — https://www.tmz.com/2026/11/19/hollywood-burbank-airport-no-air-traffic-controllers/
Get NonRev Travel News by email
A weekly recap newsletter, sent out every Sunday, with the airline, airport, cruise and travel-warning news that matters to airline employees and retirees. Free.
Subscribe free









